Features:
This is all the most remarkable end instruments, providing you the most ideal solution for your entire off network set-up. Through our three phase off grid inverter 150KW, our 12Kw of boards will provide you substantial charging limit amid the day. This is appropriate for a vast off network house, workshop or farm. On the off chance that you are far from a network association, this is likely considerably less expensive than being associated with the lattice and after that you would have no money to pay for utilizing it!
Different Application Zone
Characteristics
Technical Specification:
Model | SDP-150KW | |
Isolation mode | Low Frequency Transformer | |
DC Input | Rated voltage (Vdc) | 480V |
Rated current | 312.5A | |
AC Output | Rated output power | 150KW |
Output waveform | Pure Sine Wave | |
Rated Voltage | 380VAC 3% | |
Phases | 3 phase 4 wire | |
Rated current | 227A (phase current) | |
Frequency | 50Hz or 60Hz | |
Rated output voltage range (V) | 380/400/415/440VAC optional | |
Power Factor | 0.95 | |
Overload Ability | 150%, 5 seconds | |
Efficiency | >93% | |
Waveform distortion rate (THD) | <3% Linear load | |
Dynamic Response (0 to 100% load) | 5% 50ms | |
Display | LCD | |
Running mode | Working continuously | |
Electrical insulation properties | 2000Vac, 1 Minute | |
Protection Function | Protection | Input reverse polarity, under voltage, over voltage, output over-current, short circuit, overheating etc. |
Cooling method | Fan-cooled | |
Short-circuit protection | No automatic recovery, need to restart the machine | |
Working environment | Noise ( 1 meter) | 50dB |
Degree of protection | IP20 indoor | |
Working Altitude | 2000 | |
Working temperature | -25~+55 | |
relative humidity | 0~90% non-condensing | |
Mechanical dimension | Depth x Width x Height | 900 x 1100 x 1600mm |
Weight kg | 600Kg |