Specification:
Model | SDP-40KW | ||
Isolation mode | Low Frequency Transformer | ||
DC Input | Rated voltage (Vdc) | 360V | |
Rated current | 111A | ||
AC Output | Rated output power | 40KW | |
Output waveform | Pure Sine Wave | ||
Rated Voltage | 220V±3% | 380VAC±3% | |
Phases | Single phase | 3 phase 4 wire | |
Rated current | 182A | 61A (phase current) | |
Frequency | 50Hz or 60Hz | ||
Rated output voltage range (V) | 220/230/240/380/400/415VAC optional | ||
Power Factor | 0.9 | ||
Overload Ability | 150%, 5 seconds | ||
Efficiency | >93% | ||
Waveform distortion rate (THD) | <3% Linear load | ||
Dynamic Response (0 to 100% load) | 5% 50ms | ||
Display | LCD | ||
Running mode | Working continuously | ||
Electrical insulation properties | 2000Vac, 1 Minute | ||
Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. | |
Cooling method | Fan-cooled | ||
Short-circuit protection | No automatic recovery, need to restart the machine | ||
Working environment | Noise ( 1 meter) | 50dB | |
Degree of protection | IP20 indoor | ||
Working Altitude | 2000 | ||
Working temperature | -25~+55 | ||
relative humidity | 0~90% non-condensing | ||
Mechanical dimension | Depth x Width x Height | 650 x 750 x 1100mm | |
Weight | 350Kg |