Our each and every step in manufacturing is made towards advancements to relay supreme quality in our Power Phase Transformer. Safety rules and regulations are synced right from modeling, designing to implementation at customers site. Various researches are undertaken to make an efficient and affordable transformer to keep the clients satisfied. In addition to this, our Power Phase Transformer comes in a sturdy and durable structure that helps in effective working of electronic equipment and appliances at your particular place.
Technical Data
Model | SDT-8KW | |
Isolation | Low Frequency Transformer | |
AC Input | Input rated voltage(VAC) | Single phase 230V |
Input voltage range | 110/120/220/230/240Vac optional | |
Input rated current(A) | 34.78A | |
AC Output | Rated AC output power | 8KW |
AC output waveform | Pure sine wave | |
Phases | Three phase, 4 wires | |
Output rated voltage | 415VAC 3% | |
Output voltage range | 220/240/380/400/415/440/480Vac optional | |
Output Frequency | 50Hz/60Hz 0.05Hz | |
Output rated current(A) | 11.1A (per phase) | |
Power Factor(PF) | 0.95 | |
Overload Ability | 150%, 10s | |
Efficiency | >93% | |
Waveform distortion rate (THD) | <3%(Linear load) | |
Crest Factor (CF) | 3:1 | |
Display | LCD | |
Electrical insulation properties | 2500Vac, 1 Minute | |
Ambient temperature | -15 55 | |
Using environment humidity | 0 90%,No condensation | |
Protection | Input under voltage, overvoltage, output over-current, short circuit, overheating etc. | |
Structure | Cooling method | Fan-cooled |
Noise | <40dB | |
Degree of protection | IP20(indoor) | |
Using altitude(m) | 3000 | |
Dimensions (mm) | 550x550x860mm | |
Weight (Kg) | 120Kg | |
CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 |