Split phase 120-240(L1-N 120V, L2-N 120V, L1-L2 240V) Off Grid Inverter
Feature:
Technical Specification:
Model | SDP-10KW | |||
Isolation mode | Low Frequency Transformer | |||
DC Input | Input rated voltage (Vdc) | 120V | 192V | 240V |
Input rated current(A) | 83.3A | 52A | 41.6A | |
AC Output | Rated output power | 10KW | ||
Output waveform | Pure sine wave | |||
Phases | Two phase 3 wires + ground | |||
Output rated voltage | 120/240VAC±3%(L1,L2 to N 120V, L1 to L2 240V) | |||
Output Frequency | 50Hz/60Hz ±0.05Hz | |||
Power Factor(PF) | 0.9 | |||
Overload Ability | 150%, 10s | |||
Efficiency | 95% | |||
Waveform distortion rate (THD) | <3%(Linear load) | |||
Dynamic Response (0 to 100% load) | 5%,30ms | |||
Display | LCD | |||
Running mode | Working continuously | |||
Electrical insulation properties | 2000Vac, 1 Minute | |||
Protection function | Protection | Input reverse polarity, under voltage, over voltage, output over-current, short circuit, overheating etc. | ||
Cooling method | Fan-cooled | |||
Short-circuit protection | No automatic recovery, need to restart the machine | |||
working environment | Ambient temperature | -15~+55 | ||
Using environment humidity | 0~90%,No condensation | |||
Noise ( 1 meter) | 50dB | |||
Degree of protection | IP20(indoor) | |||
Using altitude(m) | 2000 | |||
CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:200 |